Loading ...
Loading ...
Loading ...
User Manual15
1. Turn the
camera on/off
To turn the camera on, slide
the power switch into the ON
position(down).Theash
charging LED on the back pan-
el will start blinking to charge
theash,andtheremaining
filmcounteronthetopofthe
camera will light up to indicate
that the camera is switched
on, and show the amount of re-
mainingfilmifafilmcassetteis
loaded. To turn the camera off
again, return the power switch
to the OFF position.
2. Load the lm
Slidethefilmdoorlatchtothe
righttoopenthefilmdoor.
Pushthefilmcassetteallthe
wayin,withthefilm’sdarkslide
facing up.
Note Please check
individualfilmpackaging
for development time,
handling and storage
details.
3. Close lm door
Whenyouclosethefilmdoor,
the darkslide will eject from
the camera automatically,
underneaththefilmshield.
Theplasticfilmshieldis
designed to protect images
from light as they develop — it
should not be removed. Take
the darkslide out from under
thefilmshieldandletthefilm
shield roll back up. If the dark-
slide has not ejected, remove
thefilmpackandre-insertit,
making sure it is pushed all
the way to the back of the
camera.
4. Set the Flash
& Lighten/Darken
Flash Thecameraashwill
trigger by default when you
shoot with the OneStep+. To
shootwithouttheash,press
andholdtheashoverridebut-
ton on the back panel as you
press the shutter button.
Warning Shooting without
ashwillreducecamera
performance and picture
qualityinmostlighting
situations except brightly-
lit, sunny environments.
We recommend always
shootingwithash.
Loading ...
Loading ...
Loading ...