Loading ...
Loading ...
Loading ...
Trouble shooting en
25
Milk/blended milk drinks too
hot.
Milk froth too thin, loud sucking
noise.
Too little milk in glass or cup. Use more milk or adjust frothing time.
Milk/blended milk drinks too
cold.
Too much milk in glass or cup. Use less milk or adjust frothing time.
No milk/milk froth dispensed.
The milk frother is soiled.
The milk frother is not inserted
in the milk.
Clean the milk frother in the dish-
washer. ~ "Cleaning the milk
system" on page 21
Use more milk, check whether the milk
frother is inserted in the milk. Slide the
outlet system right down.
The water filter does not stay in
position in the water tank.
The water filter is not mounted
correctly.
Immerse the water filter into water until
no more air bubbles escape; insert the
filter again.
Firmly press the water filter straight
down into the tank connection.
Water dripped onto the inner
floor of the appliance when the
drip tray was removed.
Drip tray removed too early. Wait a few seconds after the last drink
was dispensed before removing the
drip tray.
The brewing unit cannot be
removed.
The brewing unit is not in the
removal position (e.g. frost pro-
tection activated).
Switch the appliance on again.
The appliance cannot be oper-
ated, display messages chang-
ing.
The appliance is in demo mode. Hold the k button for at least
5 seconds to deactivate demo mode.
The grinder will not start. The appliance is too hot. Wait 1hour so the appliance can cool
down.
Display shows "Close door"
despite door closed.
The door is not properly closed. Press the door firmly closed.
The appliance is too hot. Wait 1hour so the appliance can cool
down.
Display shows: "Empty trays"
despite empty drip tray - what
to do?
Emptying is not detected when
the appliance is off.
When the appliance is switched on,
remove and re-insert the drip tray.
Loading ...
Loading ...
Loading ...