Loading ...
Loading ...
Loading ...
26
EN
BASIC MAINTENANCE
REMOVING THE SIDE GUIDES
• Identify the two hooks at the bottom of the guide
assembly and pull them gently downwards.
• Pull the guide assembly away from the side
of the oven and remove by pulling the upper
hooks of the assembly upwards from the side
of the oven.
• Remove the side guide assembly from the
oven.
REPLACING THE OVEN LIGHT
Warning!
Isolate the oven's power supply before
changing the light bulb. DO NOT touch the
bulb with your bare hands.
Oven side light (where fi tted)
Bulb type: G9 halogen, 220 V, 40 W
• Ensure that the oven is off and cool.
• If necessary, remove the side guides from the
oven.
• Slide the tip of a fl at-head screwdriver between
the glass cover and the bulb housing, taking
care not to damage the seal.
• Gently turn the tip of the screwdriver to loosen
the glass while keeping it in position with your
fi ngers to prevent it falling and breaking.
• Remove the glass and take out the old halogen
bulb.
• Insert a new halogen bulb in the holder. DO
NOT touch the bulb with your bare hands.
• Press the glass cover back on, repositioning
the gasket.
• Reposition the oven rack.
• Refi t the side guide.
• Reinstate the power supply.
REPLACING RESERVOIR SEAL
Each time the reservoir is removed, check that
the seals are intact and correctly positioned.
Replace them with those supplied if they should
be damaged.
/ Maintenance
Loading ...
Loading ...
Loading ...