Loading ...
Loading ...
Loading ...
44
EN
English
Other Operations
Other Operations
1 Press the MENU button to display the menu
screen.
STANDARD INPUT1
PICTURE SCREEN SETUP OPTION
CONTRAST
BRIGHTNESS
COLOR
TINT
SHARPNESS
MPEG NR
DNR
CTI
MID
MID
ON
PICTURE RESET
ENTER
SET
EXIT
MENU
:
0
:
0
:
0
:
:
:
:
0
:
0
2 Use the 2/3 buttons to select [OPTION].
STANDARD INPUT1
:
:
ENERGY SAVE
POWER MANAGEMENT
:
OFF
:
AUTO POWER OFF DISABLE
:
ORBITER OFF
:
MASK CONTROL ON
:
INPUT1 SELECT D-SUB
:
SR
+
MODE OFF
STANDARD
LANGUAGE ENGLISH
ENTER
SET
EXIT
MENU
PICTURE SCREEN SETUP OPTION
3 Use the 5/∞ buttons to select [ENERGY SAVE]
then press the SET button.
STANDARD INPUT1
:
:
ENERGY SAVE
POWER MANAGEMENT
:
OFF
:
AUTO POWER OFF DISABLE
:
ORBITER OFF
:
MASK CONTROL ON
:
INPUT1 SELECT D-SUB
:
SR
+
MODE OFF
STANDARD
ENGLISH
ENTER
SET
EXIT
MENU
PICTURE SCREEN SETUP OPTION
LANGUAGE
4 Press the 2/3 buttons to select [ENERGY SAVE]
setting.
SET
SET
EXIT
MENU
STANDARD
:
ENERGY SAVE
The factory default setting is [STANDARD].
Each time the 2/3 buttons is pressed, the setting
changes as follows:
÷ STANDARD ... Brightness is controlled in
accordance with input signal to
produce bright, easily viewed image.
÷ MODE1 ......... Brightness is controlled in
accordance with input signal, but
power consumption is less than that
used in [STANDARD] mode.
÷ MODE2 ......... Brightness is controlled in accordance
with input signal, but power
consumption is less than that used in
[MODE1].
÷ MODE3 ......... Brightness is set at fixed level,
regardless of input signal level.
Effective at reducing screen aging
due to burned lag images, etc.
5 Press the SET button.
[ENERGY SAVE] is set, and you return to the display
shown in step 3.
6 After completing settings, press the MENU button
to return to the normal display.
Note
The [ENERGY SAVE] setting affects all input sources.
Automatic Power-off
(POWER MANAGEMENT)
The unit is equipped with [POWER MANAGEMENT] and
[AUTO POWER OFF] functions; when set, the function
automatically switches the unit to either standby mode or
power off mode whenever a sync signal is not detected
(a warning message is displayed on the screen before the
functions operate).
Notes
÷ Power Management function setting is only effective D-SUB is
selected with [INPUT1 SELECT], and there is PC signal input
via INPUT1.
÷ Setting the Auto Power Off function is only effective in cases
other than the above.
÷ Always turn off the unit’s main power switch when not using
the display for extended periods of time.
3 STANDARD 2
3 MODE2 2 3 MODE1 23 MODE3 2
Loading ...
Loading ...
Loading ...