Loading ...
Loading ...
Loading ...
16
EN
English
Installation and Connections
Installation and Connections
Connection to INPUT2
Connect an AV component with a digital video output
(digital set top box, DVD player, etc.) compatible with
HDCP (High-bandwidth Digital Content Protection).
Before attempting to connect one of these components,
read its operating instructions to make sure that it can be
connected.
After connection is made, on-screen setup is necessary
to match the connected component. Please see page 25
to 27.
Notes
÷ Use a HDMI (High Definition Multimedia Interface) cable for
connection.
÷ When connecting a component with DVI connector, use an
DVI / HDMI conversion cable to make a connection.
÷ It is not a jack intended to be used with a personal computer.
÷ See appendix 1 (page 52) for information regarding signal and
display formats supported by INPUT2.
Connection to INPUT3
Connect an AV component that has S-video output jack to
S-VIDEO (INPUT3) jack.
S-VIDEO
INPUT3
AUDIO
RL
HDMI
INPUT2
AV component with a
digital video output
Connection to INPUT4
Connect an AV component that has a video output jack to
INPUT4 jack. The VIDEO OUT (INPUT4) jack can be used
to output the video signal to a separate monitor, recording
device or other component with video input capability.
Note
A video signal will not be output from the VIDEO OUT (INPUT4)
jack when the main power of this display is off or in standby
mode.
OUT
VIDEO
INPUT4
IN
AV component
AV component
To a monitor or a
recording device
Loading ...
Loading ...
Loading ...