Loading ...
Loading ...
Loading ...
30
5 Maintenance
T Turn the switch to the °position.
WATER
T Rinse the receptacle thoroughly, fill it with 8.5 oz (250ml) of
fresh water and immerse the milk pipe in the water.
T Empty the other receptacle and place it under the fine foam
frother once more.
T Press the Rotary Switch.
OPEN SWITCH
T Turn the switch to them position.
The fine foam frother and the milk pipe are rinsed with fresh
water.
CLOSE SWITCH
T Turn the switch to the °position.
CAPPUCC. (example)
To make sure the fine foam frother works properly, and in the
interests of hygiene, it must be dismantled and rinsed daily if you
have been preparing milk. Your D6 will not prompt you to
dismantle and rinse the frother.
T Remove the milk pipe and rinse it thoroughly under running
water.
T Carefully remove the fine foam frother from the Connector
System
©
by twisting slightly.
T Dismantle the fine foam frother into its individual parts.
T Rinse all the parts under running water. If there are severely
dried-on milk residues, firstly immerse the individual parts
in a solution of 8.5 oz (250ml) cold water and 1 capful of JURA
milk system cleaner. Then rinse the parts thoroughly.
T Re-assemble the fine foam frother.
E Ensure that all individual parts are correctly and firmly
connected to ensure optimum operation.
T Firmly attach the fine foam frother to the Connector
System
©
.
Dismantling and rinsing
the fine foam frother
Loading ...
Loading ...
Loading ...