Loading ...
Loading ...
Loading ...
26
4 Permanent settings in programming mode
By instructing your D6 to automatically switch itself off, you can cut
down your energy consumption. If this function is activated, your
D6 switches off automatically after the preset time following the
last action on the machine.
You can set the automatic switch-off to 15minutes, 30minutes or
1–9hours.
Precondition:
CAPPUCC. is displayed (example).
T Touch the P symbol for approximately 2 seconds until
RINSE appears on the display.
T Turn the Rotary Switch until
OFF FROM is displayed.
T Press the Rotary Switch to enter the program item.
30MIN.
T Turn the Rotary Switch to change the setting.
T Press the Rotary Switch to confirm the setting.
OK appears briefly on the display.
OFF FROM
T Touch the P symbol to exit programming mode.
CAPPUCC. (example)
In the program item
UNITS you can set the unit used for the
amount of water.
Example:Proceed as follows to change the unit for the amount of
water from
ML to OZ.
Precondition:
CAPPUCC. is displayed (example).
T Touch the P symbol for approximately 2 seconds until
RINSE appears on the display.
T Turn the Rotary Switch until
UNITS is displayed.
T Press the Rotary Switch to enter the program item.
ML
T Turn the Rotary Switch until OZ is displayed.
T Press the Rotary Switch to confirm the setting.
OK appears briefly on the display.
UNITS
T Touch the P symbol to exit programming mode.
CAPPUCC. (example)
Automatic switch-off
Unit for amount of water
Loading ...
Loading ...
Loading ...