Loading ...
Loading ...
Loading ...
Pulse Hand Grips
This product comes standard with stainless steel pulse hand grips. To activate, gently grasp both hand
grips to obtain a heart rate reading. (Note: It is recommended to wear a chest strap for Heart Rate control
program, as it is more accurate. If you wear a chest strap and use hand grips at the same time for heart
rate monitoring purpose, please note the console will take the measurement of the chest strap.) For safety,
it is not recommended to use the Heart Rate Sensors when exercising at high speeds. The Sensors may
not always be accurate for any user at all speeds. Individual physiology is a factor that can determine
accuracy, or even if the Sensors work for you at all. The Touch Heart Rate reading is not intended to be
used for medical purposes.
Pulse Grip Operating Tips: If you are not getting a consistent reading while using the hand pulse option,
we recommend the following suggestions:
● Make sure that the palms of the hands are touching the contact area
of each hand pulse grip.
● Maintain an even pressure on the grips.
● Do not hold the hand pulse grips too tightly.
● Make sure your palms are warm and slightly moist.
● Excessive movement especially on an elliptical handrail is not
optimum for hand grips or any High Intensive Exercise while on a
machine.
Built in Wireless Heart Rate Receiver
Note: Chest strap transmitter does not come with this unit; contact BODYCRAFT,
or your dealer for purchase.
This product is equipped with a built-in receiver for your heart rate monitoring. Any heart rate telemetry strap
that transmits at 5 KHz or Bluetooth is compatible. To get an accurate reading using these devices, you will
need to be within three feet of the console, and a minimum of four feet from others using a heart rate
monitoring device.
Note: The transmitter may fluctuate erratically if you are too close to other heart rate monitoring equipment
or there is other electronics nearby, such as TV, Radio…
While using heart rate control modes, the computer monitors the exact measurement of your pulse. Heart
rate frequency is displayed while the computer continually compares heart rate to the preprogrammed
personal data. The computer adjusts the wattage to maintain heart rate at the preprogrammed level.
How to Wear Your Sensor/ Transmitter (Chest Strap)
○ Buckle one end of the chest strap onto the transmitter.
○ Adjust the band length so that the fit is snug, but not too tight.
○ Buckle the other end of the chest strap onto the transmitter.
○ Center the transmitter on your chest below the pectoral muscle (breasts).
○ Stretch the transmitter away from your chest and moisten the conductive
electrode strips located next to the buckles with water.
Note: The transmitter is on automatically when being worn. It is off when it is not connected to your body.
However, as moisture may activate the transmitter, thoroughly dry the transmitter to prolong battery life.
Heart Rate Monitoring Device & Exercise Tips
Loading ...
Loading ...
Loading ...