Renpho RF-ALM070 Air Compression Leg Massager

Product introduction

Using the Leg Massager

1. Important tips before use
   • When wearing the wraps. please ensure the corresponding wraps for Left and Right legs. There is a round sticker on the hose interface marks "R" and "L". please match the right color and legs to make sure the normal use. Please connect the hose correctly refer to the below picture.
     

Find the marks on the thighs wraps. it shows which side is UP.
Please refer to the below picture.

Make sure all of the hose have been attached securely and color matched.

If you feel powerful or uncomfortable. here are some solutions for your better reference

01-Choose the lowest intensity

02-Open the Velcro of the corresponding part

03-Press POWER button to turn off

04-It is recommended to leave a gap available to put 4 fingers in it or choose the lowest intensity if you feel powerful
Please refer to the below picture

The length of air hose can be adjustable according to your need.
Please check the below picture.

The temperature rise of handheld controller is normal.

Operation Instruction

Power On/Off Button. Press to turn on/off the massager.
The default mode is combine massage mode 1 with air intensity 2.

Combine Massage Modes. Press to select from the 3 combine massage modes.
Combine 1: Massage full legs.
Combine 2: Massage feet and calves.
Combine 3: Massage feet. calves. thighs by turn.

Separate Massage Modes. Press to select from the thigh. calf and foot separately.
T: Massages thighs
C: Massages calves
F: Massages feet

Note: The massager will be auto shut-off every 20 minutes. And before auto shut off. the indicator light of the corresponding mode will be BLINKING RED. Press the power button again to re-run the massager.

The massager comes with memory design without power cut off. so it automatically operates the last running mode and intensity when powering on.

Air Intensity Button. Press to reduce or enhance the intensity.

There are 4 intensity levels for each mode, the default intensity is level 2. It is recommended to leave a gap available to put 4 fingers in it or choose the lowest intensity if you feel powerful.

You can choose to massage only one leg at one time. make sure that all of hoses connect to the boots and the color matches both right and left boot. Then only wear left or right boot.

Safety & Maintenance

1. Do not use spare parts that are not approved by the manufacturer.

Non-professional repair personnel should not dismantle or replace the parts of the leg massager without permission.

If the power cord is damaged. it must be replaced by the related professional personnel in order to avoid danger.

Do not use or store the product in a place with humidity or high temperature.

Unplug the power cord after use.

Stop using it immediately if any adverse reactions occur.

Stop using it immediately and cut off the power if the product becomes extremely hot or the product begins to smell or emit an odor.

Do not move the product by pulling the power cord.

This product should not be used by those who are deficient in physical. sensory. or Controller mental abilities (possibly including children).

Cleaning Method

Do not wash. machine wash, it's recommended to wipe massager with a soft. damp or dry cloth.

Packing Method
Please avoid folding the tube when packing. or it may cause inflation failure.

TROUBLESHOOTING

• The product does not work
  • The power is not connected or the plug is loose
    • Plug in the power cord correctly(The indicator light will be red after press the power button)
  • The power switch is not on or auto-shut-off timer turns it off
    • Turn on the power switch
• Some part can’t inflate
  • The color of hose doesn’t match
    • Please follow the instructions according to Important tips before use to match and connect the air hose
  • The current massage mode exclude massage this part
    • Please choose the corresponding mode
  • The tube have not been attached securely, and there is air leaks
    • Please check again if hose attached secure ly with boots. (no gap between hose inter face and boot)
  • The tube has been folded
    • 1. Please avoid folding the tube when packing
    • 2. Please contact [email protected]
• Feel powerful or uncomfortable
  • Wrap your legs too tight
  • Or Maybe use the highest intensity
    • 1. Choose the lowest intensity
    • 2. Open the Velcro of the corresponding part
    • 3. Press POWER button to turn off
• The product suddenly stops working
  • The massager’s over heat protection feature will switch off the massager automatically when too hot
    • Wait for the massager to cool down before powering it back on
  • 20 minutes timer turns it off
    • Press the power button again
• The handheld controller gets hot
  • The product have been used continuously for long time(The tempera ture rise of handheld controller 59°F is normal.)
    • Recommended to use 20 minutes to 30 minutes to avoid OVER USE. After turning off, allow the massager to cool down before using again
• Feel the differ ence of intensity when massaging two legs at the same time
  • Some tube has not been attached securely or attached the wrong hose
    • Please make sure the tube attached securely
  • When wearing the boots. the gap you leave may be different
    • Please leave the same gap when you wear it

If you encounter any other problems, contact: [email protected]

SPECIFICATIONS

• Product Name: Renpho Leg Massager
• Input: 12 V == 0.6 A
• Rated Power: 7.2 W
• Power Source: 100-240VAC
• Timer: 20 minutes

Related Products