User Manual Winix 5500-2 Air Purifier

Documents for Winix 5500-2

The following documents are available:
User Manual Specification Photos
5500-2 photo
Loading ...
Loading ...
Loading ...

Specifications

Winix 5500-2 Questions and Answers


#1 how do i put the fan on low manually? when i put it on low again it jumps back to high in a few minutes. is this normal?

It will speed up when it is actively trying to clear air. Once it cleans the air, it will go back down to your low preset.

#2 I have an air purifier with a large carbon filter that emits an odor into the room. Does the carbon filter in this unit release any smell?

Depends on how you clean it and with what. I use dawn with a cap or 2 of pine sol, warm water and start switching and wringing it out. It might take a couple of times but a little time is less costly.

#3 I see the lights changing color when cooking cleaning etc. I am just wondering why no dust on the filter after 2 weeks of use. Is it really working?

Depends on your settings. If you have it on Auto the sensor clicks on and off. Turn (Auto) to the off position set everything to high when cooking and dusting and see what happens.

#4 Is there a way to permanently disable the Plasmawave feature?

Not unless you go inside if you know what your doing. But there’s a switch that you can turn on and off the plasma unit.

#5 It says that the 5500-2's carbon filter is washable in the manual, can you buy just the hepa filter?

No. Carbon is activated and will lose its charge over time. Washable or not, you need to change them out. There are aftermarket brands selling the filter only but it is not recommended.