Loading ...
Loading ...
Loading ...
19
INSTALLATION INSTRUCTIONS
Before you start using the Ice & Water or Automatic Ice function
Check your refrigerator is switched on.
Allow at least 2hours for your refrigerator to cool before use.
Complete all the flushing steps detailed in this installation/user guide to ensure
optimum performance of your water filter.
For Ice & Water models only:
1 Press the water dispenser pad to dispense 1/2 gal (2L)
of water.
There may be carbon residue dispensed together
with water. This is not harmful, and normal during
flushing process.
2 Wait for 2 minutes before dispensing again.
3 Dispense another 1/2 gal (2L) of water. Your water
dispenser is now ready for use.
4 Water will continue to drip from the dispenser for a
few more days after installation to clear remaining
trapped air in the dispenser. Check the drip tray
regularly and empty when required.
For Ice & Water and Automatic Ice models:
1 Turn the ice maker on by pressing the button.
Thelight above the button will be illuminated
when the ice maker is on.
2
Press the , and together for 4seconds then
close the doors. The ice tray will empty the water
into the bin below. The ice tray will only empty after
the doors are closed.
3 Repeat step
2
to remove dust in the ice tray
collected during manufacture and transport.
4 Empty the water, dry the bin and return it correctly
(refer to diagrams 1 and 2 for placement of ice bins
for your refrigerator).
5 Once your ice maker is turned on the first bin of ice
may be discoloured, this is not harmful and normal
during the flushing process. Discard the first full bin
of ice made. Your ice maker is now ready for use.
– For Ice & Water models: the water filter will
reach optimum performance after two to three
full bins of ice.
– For Ice only models: the water filter will reach
optimum performance after four to five full
binsof ice.
Ice storage bin and
scoop in correct position
Diagram 1
Diagram 2
Water dispenser
Loading ...
Loading ...
Loading ...