Loading ...
Loading ...
Loading ...
17
INSTALLATION INSTRUCTIONS
7
Attach the wall mounting bracket with the
two screws provided, attach the bottom
screw first then the top screw (refer to
Diagram5).
8
Insert the filter water into the filter head.
Push the filter firmly into the filter head
and turn in a clockwise direction until it
locks into place (refer to Diagram 6).
9
To flush the water filter of any trapped air,
harmless carbon fines and check for leaks:
Aim the end of the filter outlet tubing into
a bucket, turn on the faucet and run 2 gal
(8L) of water through. Once complete, turn
the faucet off.
Note: Further flushing is required before
first use of your ice or water functions,
please refer to ‘Before you start using
theIce & Water or Automatic Ice function’
fordetails.
!0
Run the 1/4” (6mm) tubing to the back of the refrigerator ensuring there is
enough tubing to pull the refrigerator out for service.
!1
Using the measurement guide shown in Diagram 7, mark out 5/8” (16mm),
on the end of the tubing as shown in Diagram 8.
!2
Insert the outlet tubing to the water (solenoid) valve up to the marked line.
The outlet tube can be identified by the upward arrow on the filter head
and a blue mark on the tube.
!3
Pull gently on tubing to ensure it is locked in as shown in Diagram 10.
!4
Turn the faucet on and check that all connections are dry and free of drips.
!5
Coil water line tubing behind the refrigerator. Pushyour refrigerator into
place being careful notto kink or squash the water line tube.
!6
Read pages 16–17 carefully and then turn refrigeratoron.
Diagram 7
Diagram 9
Diagram 10Diagram 8
Completed installation
Diagram 5
¾” OD x 3/16” ID
Flat Washer
#10-32
Pan Head
Pozi Drive
Wall Plug
#8 x 3/4”
Truss Head
Philips Drive
Self Tapping Screw
¼-20 x ½”
Pan Head
Philips Drive
Machine Screw
M4 x8
Pan Head
Torx Drive
Machine Screw
#10x 3”
Countersunk
Pozidrive
Self tapping Screw
FP Pro Hood Fasteners
¾” OD x 3/16” ID
Flat Washer
#10-32
Pan Head
Pozi Drive
Wall Plug
#8 x 3/4”
Truss Head
Philips Drive
Self Tapping Screw
¼-20 x ½”
Pan Head
Philips Drive
Machine Screw
M4 x8
Pan Head
Torx Drive
Machine Screw
#10x 3”
Countersunk
Pozidrive
Self tapping Screw
FP Pro Hood Fasteners
Diagram 6
Loading ...
Loading ...
Loading ...