Loading ...
Loading ...
Loading ...
Voice Alert
32
Error 1: Front bumper stuck
Front bumper is stuck. Tap it repeatedly to remove any dust;
if not, then move the device to a new position and try again.
Error 2: Wheel stuck. Check the wheel and
move it to a new position.
Wheel may be stuck or trapped. Clear any obstacles in the surrounding area and check
the wheel for any trapped dust. Move the device to a new position and try again.
Error 3: Side brush stuck.
Side brush may be stuck. Please clean it and try again.
Error 4: Rolling brush stuck.
Remove and clean the rolling brush.
Remove the rolling brush, roller joint, roller brush cover, and suction inlet to clean it.
Once cleaned, place the items back into the device and try again.
Error 5: Device trapped. Clear the
surrounding area.
Device is trapped. Clear any obstacles in the surrounding area and try again.
Error 6: Device trapped. Place device near the
position where the problem occurred.
Device may be suspended in air. Move it to a new position close to the original position
and try again. If the device is still unable to start, clean the edge sensor and try again.
Error 8: Low battery, shutting
down device. Please charge your device.
Low Battery; system will shut down. Charge the device and try again.
Error 9: Magnetic Boundary
Strip detected. Move device to a different area.
Device is too close to a strong magnetic field or strip.
Move the device to a different area and try again.
Error 10: Front infrared sensor needs cleaning.
Front infrared sensor is blocked by dust and requires cleaning.
Error 11: Right wall sensor needs cleaning.
Clean the right side wall sensor since it's covered in dust.
Error 12: Device tilted. Please put the device
on a flat surface to start.
Device may be tilted. Put the device on a flat surface and try again.
Error 7: Wheel suspended.
Please move the device to a new position.
Wheels may be suspended in air. Move the device to a flat surface and a new position
close to the original position then try again.
Voice Prompt Cause and Solution
When Coredy L900W Robot encounters a problem, the red indicator on Coredy L900W Robot will be flashing and you will hear
the relevant voice prompts. Follow the voice prompts to solve the problems.
Loading ...
Loading ...
Loading ...