Loading ...
Loading ...
Loading ...
30
Coredy L900W Robot
cannot be activated.
Make sure Coredy L900W Robot is connected to a power source.
Make sure the battery is fully charged.
If you still have trouble, reset the Coredy L900W Robot (refer to the “Using Your Coredy L900W Robot >
Reset the System” section in this manual).
5 Troubleshooting
Coredy L900W Robot
suddenly stops
working.
Check if Coredy L900W Robot is trapped or stuck on an obstacle.
Check if the battery level is too low.
If you still have trouble, turn off Coredy L900W Robot, wait for 3 seconds, and then turn it back on.
You cannot schedule
cleanings.
Make sure Coredy L900W Robot is turned on.
You can set the time of day and scheduled cleaning time via the Coredy Robot app.
Make sure the scheduled time has been set correctly.
Check if Coredy L900W Robot’s power is too low to start cleaning.
Coredy L900W Robot will not start a scheduled cleaning while already performing a task.
Suction power is
weak.
Check if any obstructions are blocking the suction inlet.
Empty the dust collector.
Clean the filter with water.
Check if the filter is wet due to water or other liquid on the floor. Air-dry the filter completely before use.
Coredy L900W Robot
cannot be charged.
Check if the indicator on the Charging Dock lights up (when Coredy L900W Robot is not on the Charging
Dock). If not, contact the Coredy service center to repair or replace the Charging Dock.
Check if the indicator on the Charging Dock is off and the light on the main unit is breathing during charging.
Dust off the charging contact pins with a dry cloth.
Coredy L900W Robot
cannot return to the
Charging Dock.
Remove objects within 1.6 ft/0.5 m to the left and right side and within 4.9 ft/1.5 m of the front of the Charging Dock.
Make sure Coredy L900W Robot started cleaning from the Charging Dock and has not been moved during cleaning.
When Coredy L900W Robot is in the vicinity of the Charging Dock, it will return more quickly. However, if the
Charging Dock is located far away, Coredy L900W Robot will need more time to return. Please be patient as it works
its way back.
Clean the charging contact pins.
Problems Solutions
Loading ...
Loading ...
Loading ...