Loading ...
Loading ...
Loading ...
99
SSL: Secure Socket Layer
TLS: Transport Layer Security
Subject: This field allows the user to define the subject line of the email that is sent to the receivers.
Recipients: This field allows the user to enter the receiver email address. These email addresses are the ones that will
receive any emails pertaining to alert and alarm emails sent by the camera. Up to 3 email addresses can be entered in
this field.
Interval: This field allows the user to define, in seconds, how long the system should wait between sending emails.
This prevents multiple emails from being sent out.
Keep Alive: This checkbox allows the user to enable a function to periodically check in with the SMTP server to ensure
it can connect correctly.
Email Test: This button causes the system to automatically send out an email to test the connection is OK or not. Prior
to the email test, please save the email setup information.
To reset to default settings, click the Reset Defaults button. To refresh the page, click the Refresh button. To save the
settings, click the Save button.
5.4.2.6. UPnP
UPnP stands for Universal Plug and Play, and it is a protocol used to easily connect devices to the internet. In the case
of this camera, it allows the camera to connect to the router in an easy manner to quickly allow for remote access.
Below is a screenshot of the UPnP settings screen:
Below is an explanation of fields on the UPnP settings screen:
Enable: This checkbox allows the user to enable the UPnP function.
Router State: This field shows the UPnP status and has two options: Unknown: This means that
UPnP mapping has failed. Successful: This means that UPnP mapping has succeeded.
Port Mapping List: This table is used to show how the ports for each protocol listed below have been remapped by the
UPnP protocol.
Loading ...
Loading ...
Loading ...