Loading ...
Loading ...
Loading ...
30
PAge heAder.....
TROUBLESHOOTING
PROBLEM POSSIBLE CAUSES WHAT TO DO
• Steam Wand is blocked Use the pin on the cleaning
tool to clear the opening. If
the steam wand continues
to be blocked remove the
tip of the steam wand using
the spanner in the middle
of the cleaning tool. Refer
to ‘Cleaning the Steam
Wand’, page 25.
No hot water • Empty tank Fill tank.
• Steam Wand is blocked Use the pin on the cleaning
tool to clear the opening. If
the steam wand continues
to be blocked remove the
tip of the steam wand using
the spanner in the middle
of the cleaning tool. Refer
to ‘Cleaning the Steam
Wand’, page 25.
Milk is not smooth after
texturing
• Not enough steam Steam wand may be
blocked. Refer to ‘Cleaning
the Steam Wand’, page 25.
• Milk is not cold enough Use cold fresh milk, refer to
‘Texturing Milk’, page 20.
Machine is not working The safety thermal cut out
may have activated due
to the pump overheating.
Turn the machine off and
allow to cool for about
30-60 minutes.
BES810BSS_USC_IB_C14.indd 30 3/07/2014 10:03 am
Loading ...
Loading ...
Loading ...