Loading ...
Loading ...
Loading ...
8
If the position your fridge occupies would be better
suited to a reverse opening arrangement, carefully follow
these diagrams and instructions. The reversing of doors
or replacement of light bulbs is not covered by warranty.
Tools you will need:
• 8mm socket driver
• Cross-shaped screwdriver
• Putty knife or thin-blade screwdriver
• 3mm allen key
Precautions
• Turn off the appliance
• Unplug the power cable
1. Remove the hinge cover and the block cover the freezer
body, then remove the cover plate from the door. Using
the 8mm wrench, remove the special flange self tapping
screws and the hinge.
Note: Please hold on to the freezer door to prevent door
dropping.
3
1
54
2
1
Cover plate
2
Hinge cover
3
Block cover
4
Hinge
5
Special flange self tapping screw
2. Remove the door and place it carefully on a on
smooth surface with the door panel facing upwards.
3. Using the 8mm wrench, unscrew and remove the
hinge axis.
hinge
axis
4. Flip the upper hinge over as shown below.
5. Replace the hinge axis and washer.
6. Gently lever off the handle covers and remove the
screws. Remove the handle and set beside the
freezer door.
handle
covers
screws
handle
7. Remove the screw hole covers from the opposite side
of the door and use them to cover the holes left by
the removed screws.
screw hole
covers
screw hole
covers
REVERSING THE DOOR
REVERSING THE DOOR
Loading ...
Loading ...
Loading ...