Loading ...
Loading ...
Loading ...
11ELECTRONIC CONTROLS
All functions and controls of the freezer are accessible
from a control panel conveniently located on the roof
of the cabinet. A display circuit board allows easy
configuration of features and settings in a simple and
intuitive manner.
TIPS & INFORMATION
IMPORTANT
When the freezer is turned on, all the pilot lights will turn
on for 3 sec and you will hear a long “beep”. The display
board consists of four buttons and eight pilot lights. You
will hear a short beep when you press the button. The
electronic controls are located on the inside top section
of the cabinet.
The display panel consists of four buttons and eight
display lights. When the freezer is turned on all the
display lights will turn on for 3 seconds and the freezer
will emit a long “beep”. A short sound of “beep” will
subsequently be heard when pressing any
of the buttons after initial start-up.
On/Hold for Off
Start the freezer by pressing the On button. To turn the
freezer off, press and hold the On button. Pressing the On
button after the freezer has been turned off will return the
freezer to it’s previous setting.
Controlling the temperature
We recommend that when you start your freezer for the
first time, the temperature is set to -18°C. If you want to
change the temperature, follow the instructions below.
Make only small adjustments and wait 24 hours to see if
it’s correct.
Checking the softness of ice cream kept in the freezer is a
good way of checking the temperature.
ELECTRONIC CONTROLS
NOTE: When you set a temperature, you set an average
temperature for the whole freezer cabinet.
Temperatures inside each compartment may vary,
depending on how much food you store and where you
place it. High or low room temperature may also affect
the actual temperature inside the freezer.
If no button has been pressed for some time there
may be a delay of up to 2 seconds before the display
responds, this is normal and is a part of the display design
to reduce the chance of accidental changes.
To set the freezer temperature, press the Temp button
until the desired temperature between -14°C and
-24°C is illuminated. The light of the corresponding
temperature will be lit corresponding values according
to the following sequence.
Quick Freeze
Use the Quick Freeze function when you add a large
amount of food to the freezer or you need to chill food
or drinks quickly. To use this function, press the Quick
Freeze button once. The button will light up and the
freezer temperature indicator will display -24°C.
Quick Freeze will automatically switch off after 26 hours.
You can switch the Quick Freeze function off manually
by pressing the Quick Freeze or Temp button once.
Door alarm
If the freezer door is left open for longer than 2 minutes, a
buzzer will sound The buzzer will beep 3 times per minute
for 10 minutes. Closing the door cancels the door alarm.
To save energy, please avoid keeping the door open for a
long time when using the freezer.
Alarm Reset
If the alarm sounds, the Alarm Reset icon will light up and
a buzzing sound will start. Press the Alarm Reset button
to stop the alarm.
Loading ...
Loading ...
Loading ...