Loading ...
Loading ...
Loading ...
Coolant
(4) air cleaner housing cover
(5) quick fastener
(6) left side cover bolt
(7) collar
(8) seat mounting bolt
(9) left side cover
(10) reserve tank cap
Servicing Your Honda 49
4. Add coolant to the reserve tank as require to
bring the coolant level to the UPPER level
mark.
5. Install the reserve tank cap (10).
6. Install the left side cover (9), seat mounting
bolt (8), collar (7) and left side cover bolt (6).
Close the air cleaner housing cover (4) and
turn the quick fastener (5) clockwise.
Tighten the seat mounting bolt to the specified
torque:
19 lbf·ft (26 N·m, 2.7 kgf·m)
Cooling System Inspection
1. Check the cooling system for leaks (see the
Honda Service Manual for troubleshooting of
leaks).
2. Check the water hoses (1) for cracks,
deterioration, and radiator hose clamp for
looseness.
3. Check the radiator mount for looseness.
4. Make sure the siphon hose (2) is connected
and not clogged.
5. Check the radiator fins for clogging.
6. Check the bleed hole (3) below the water
pump cover (4) for leakage. Check for signs
of seal leakage. A small amount of “weeping”
from the bleed hole is normal. See the Honda
Shop Manual or consult your dealer for
replacing the mechanical seal or oil seal. Both
seals should be replaced at the same time.
(1) water hoses
(2) siphon hose
(3) bleed hole
(4) water pump cover
(4)
(5)
(6)
(10)
(9)
(8)
(7)
(2)
(1)
(3)(4)
Loading ...
Loading ...
Loading ...