Loading ...
Loading ...
Loading ...
Carburetor Adjustment & Tuning Tips
Carburetor Removal
1. Turn the fuel valve OFF.
2. Drain the remaining fuel in the float bowl into
an approved gasoline container by loosening
the carburetor drain screw (1).
(1) carburetor drain screw
Drain the carburetor into an approved gasoline
container and dispose of it in an approved
manner (page 143).
Improper disposal of drained fluids is harmful to
the environment.
NOTICE
(1)
130 Adjustments for Competition
(2) band
(3) rear suspension upper mounting nut
(4) rear suspension upper mounting bolt
6. Lift the subframe to the upright position (page
39).
7. Loosen the intake band screw (5) and remove
the clip (6).
(5) intake band screw
(6) clip
8. Disconnect the throttle position sensor
connector (7). Remove the carburetor.
(7) throttle position sensor connector
9. Remove the hot start cable holder (8).
(8) hot start cable holder
(2)
(3)
(4)
(5)
(6)
(7)
(8)
WARNING
Gasoline is highly flammable and
explosive. You can be burned or seriously
injured when handling fuel.
• Stop the engine and keep heat, sparks
and flame away.
• Handle fuel only outdoors.
• Wipe up spills immediately.
3. Tighten the carburetor drain screw after drain
the fuel.
4. Remove the fuel tank (page 37).
5. Remove the band (2) and rear suspension
upper mounting nut (3), and pull out the rear
suspension upper mounting bolt (4).
Loading ...
Loading ...
Loading ...