Loading ...
Loading ...
Loading ...
Fuel Line
(1)
Fuel System
Fuel Filter
The fuel filter is mounted on the bottom left side
of the fuel tank. Dirt accumulated in the filter
will restrict the flow of the fuel to the carburetor .
Therefore, the fuel filter should be serviced
frequently.
To service the fuel filter:
1. Remove the fuel tank (page 37).
2. Drain the fuel from the fuel tank into an
approved gasoline container. Disconnect the
fuel valve (1) and fuel lines (2).
3. Remove the fuel joint (3) from fuel tank by
removing the bolts (4).
(5) fuel filter (6) O-ring
(6)
(5)
(1) fuel lines
1. Check for leaks.
2. Check the fuel lines (1) for cracks,
deterioration, damage or leakage. Replace the
fuel line, if necessary.
3. Check for interference between the frame and
tank and adjust if necessary.
(1)
42 Servicing Your Honda
(1) fuel valve (3) fuel joint
(2) fuel lines (4) bolts
(4)
(1)
(3)
(2)
4. Wash the fuel filter (5) in high flash-point
cleaning solvent.
5. Check that the O-ring (6) is in good condition
and install it onto the fuel joint. Install the
fuel filter in the fuel tank by tightening the
bolts to the specified torque:
7 lbf·ft (10 N·m, 1.0 kgf·m)
Attach the fuel valve and fuel lines.
6. Install the fuel tank (page 38) and refill the
fuel.
Turn the fuel valve to ON or RES; check for
fuel leaks.
Loading ...
Loading ...
Loading ...