Foscam FI9900P User Manual

Loading ...

www

.foscam.co

Shenzhen

Foscam

Intelligent

Technology

Co.,

Limited

Tel:

755

2674

5668

Fax:

755

2674

5168

1----- SMTP Server/ Port /Transport Layer Security Enter SMTP server for sender. SMTP port is usually

set as 25. Some SMTP servers have their own port, such as 587 or 465, and Transport Layer Security usually

is None. If you use Gmail, Transport Layer Security must be set to TLS or STARTTLS and SMTP Port must be

set to 465 or 25 or 587, which port you choose should be decided by which Transport Layer Security you

select.

2-----SMTP Username/ password: ID account and password of the sender email address

3----- Sender E-mail Mailbox for sender must support SMTP

4----- Receiver Mailbox for receiver need not support SMTP, you can set 4 receivers

5----- Save Click Save to take effect

6----- Test Click Test to see if Mail has been successfully configured.

Click Test to see if Mail has been successfully configured.

Figure 4.37

If the test success, you can see the Success behind the Test, at the same time the receivers will receive a test

mail.

If the test fails with one of the following errors after clicking Test, verify that the information you entered is

correct and again select Test .

1) Cannot connect to the server

2) Network Error. Please try later

3) Server Error

4) Incorrect user or password

5) The sender is denied by the server. Maybe the server need to authenticate the user, please check it and try

again

6) The receiver is denied by the server. Maybe because of the anti-spam privacy of the server

7) The message is denied by the server. Maybe because of the anti-spam privacy of the server

8) The server does not support the authentication mode used by the device

Test result .

Loading ...

Foscam FI9900P Outdoor HD IP Camera