Loading ...
Loading ...
Loading ...
86
Troubleshooting
Tire Puncture
a
Removing Wheels
Installation
1. To install the rear wheel, reverse the
removal procedure.
a
Take care to prevent the brake caliper
from scratching the wheel during
installation.
NOTICE
When installing the brake caliper into position, carefully
fit the brake disc between the pads to avoid scratching
them.
2. Make sure that the lug on the brake
caliper bracket is positioned in the slot on
the swingarm.
3. Adjust the drive chain.
P.66
4. Install and tighten the rear axle nut.
Torque: 65 lbf·ft (88 N·m, 9.0 kgf·m)
a
Failure to provide adequate disc-to-
caliper holder clearance may damage
the brake discs and impair braking
efficiency.
Slot
Lug
Swingarm
Loading ...
Loading ...
Loading ...