Loading ...
Loading ...
Loading ...
26
Operation Guide
2
To close the cap, align the tabs of the fuel
fill cap to the slots of the filler neck with
the arrow mark on the cap towards the
rear of the motorcycle.
3
Turn the cap clockwise until the arrow
mark points towards the front.
a
Make sure that the breather tube is not
twis
ted or blocked when the cap is
secure in place.
Fuel fill cap removal and
installation for 50-state version
(USA only)
50-state versions of this motorcycle are
equipped with an evaporative emission
control system.
P.103
For the system to function properly,
observe the following when removing and
installing the fuel fill cap.
1
To open the fuel fill cap, turn the cap
counterclockwise.
a
Do not disconnect the breather tube.
Refueling
(Continued)
NOTICE
If you replace the fuel fill cap, use only a Honda
Genuine replacement parts or its equivalent. Failure to
use the proper part could cause serious fuel system
problems.
Arrow mark
Fuel fill cap
Breather tube
Loading ...
Loading ...
Loading ...