Loading ...
Loading ...
Loading ...
22
Operation Guide
Starting the Engine
1
The fuel valve is ON.
2
Make sure the engine stop switch is in the
RUN position.
3
Turn the ignition switch to the ON position.
4
Pull the choke lever back all the way to
fully ON if the engine is cold.
5
Press the start button with the throttle
completely closed.
a
Do not open the throttle when starting
the engine
with the choke on. This will
lean the mixture, resulting in hard
starting.
6
Immediately after the engine starts, push
the choke lever forward to the halfway
position.
7
About a half minute after the engine
starts, push the choke lever forward all the
way to fully OFF.
8
If idling is unstable, open the throttle
slightly.
Start your engine using the following
procedure, regardless of whether the
engine is cold or warm.
Normal Air Temperature
10
゜
- 35
゜
C
(50
゜
- 95
゜
F):
NOTICE
If the engine does not start within 5 seconds, turn t
the ignition OFF and wait 10 seconds before trying to
start the engine again to recover battery voltage.
Extended fast idling and revving the engine can t
damage the engine, and the exhaust system.
Extended use of the choke may impair piston and t
cylinder wall lubrication and damage the engine.
Fully ON
Choke lever
Fully OFF
Halfway
position
Loading ...
Loading ...
Loading ...