Loading ...
Loading ...
Loading ...
43
TROUBLESHOOTING
PROBLEM POSSIBLE CAUSE WHAT TO DO
Dishes did not dry Incorrect loading. Ensure the dishes are not nesting
together.
Dishes were left in the
drawer for several hours
after a wash.
We recommend unloading the dishes
within a few hours after a wash
program has finished, as the small
amount of vapour left after the wash
may - with time - resettle on dishes
as condensation. Using rinse aid or
increasing its setting may also help with
drying.
Rinse aid depleted. Refill the rinse aid dispenser.
Rinse aid setting too
low.
Increase the rinse aid setting.
Normal Eco/Eco
program used.
Choose a different wash program.
Items that require a
longer drying time,
e.g. plastic utensils and
containers
Some models only:
Set the wash program with Extra dry.
(only available on some wash programs).
Program is taking
much longer than
usual
Wrong type of
detergent used.
Auto recovery program
has been triggered to
stop the dishwasher
overflowing and to
disperse excess foam.
No action required. Allow the program
to finish.
Note: you may need to run your chosen
wash program again with the correct
detergent if the dishes are not clean at
the end of the recovery program.
Excessive motor
noise
No water in the motor
area.
This usually occurs on the first use or
when the dishwasher has not been used
for long periods of time. Pour 3 cups of
water into the drawer before running a
wash program.
Loading ...
Loading ...
Loading ...