Loading ...
Loading ...
Loading ...
41
TROUBLESHOOTING
PROBLEM POSSIBLE CAUSE WHAT TO DO
Drawer will not open
(no beeping, no wash
in progress)
Childlock feature is on. Turn the Childlock off. See your
Quickstart guide for instructions.
Closed drawer auto
lock is on.
Press any button and open drawer
within 30 seconds.
DD*I models only: Knock once on
the door and open drawer within 30
seconds
Power failure during
wash program
Power outage in your
home or area.
Wait until power resumes, program
will restart in same part of wash
program.
Continuous beeping
with
A/ F code in
display
(DD*C & DD*A models
only)
OR
flashing wash
modifier indicators
(DD*I & DD*D models
only)
A fault has occurred. Refer to section ‘If there is a fault’.
Intermittent beeping Dishwasher is in pause
mode.
DD*C, DD*A and DD*D models:
Close the dishwasher and press the
button to resume the program.
DD*I & DD*D models:
Press on the control panel then
close the drawer to resume the
program.
Dishwasher will not
start
Power supply is not
connected.
Connect the power supply.
The drawer is not
closed properly.
Ensure the drawer is firmly closed.
Keylock or Childlock
feature is on.
Turn the Keylock or Childlock off. See
your Quickstart guide for instructions.
/ button not
pressed.
Press the / button.
Dishdrawer is in
“Showroom mode”.
Contact Customer Care.
Fan noise coming
from the dishwasher
after a wash program
has finished
This is normal. The
drying fan continues to
run for a set period of
time after a program
has finished to
assist with drying.
No action required. The fan will
automatically stop after the set time
is over, or when the drawer is opened.
In some cases, the fan may resume
when the drawer is closed again.
Loading ...
Loading ...
Loading ...