Loading ...
Loading ...
Loading ...
60 Servicing Your Honda
Fuel System
5. Apply small amount of engine oil to a new
O-ring (12).
Install a new O-ring to the fuel pump base (13).
6. Install the fuel pump unit holder assembly (14)
into the fuel pump base while aligning its
hooks (15) with the grooves (16) in the fuel
pump base tabs (17).
If the gap between the hooks and tabs is more
than 0.04 in (1.0 mm), replace the fuel pump
unit.
Be sure that the hooks are completely seated.
7. Connect the fuel pump yellow (18) and green
(19) wire terminals to the fuel pump base
terminals (20). Route the fuel reserve level
sensor wires properly, connect the white (21)
and black (22) wire terminals to the fuel pump
base terminals. Push the wire terminals until
they stop as shown.
Be careful not to damage the wires.
8. Install a new dust seal (23) by aligning its tabs
(24) with the fuel pump unit grooves
(25).
Ch
eck the dust seal lug (26) which is located the
index mark (27) of the fuel pump base (13).
9. Apply small amount of engine oil to a new
O-ring (28).
Install a new O-ring into the between the dust
seal (29) and collar (30) of the fuel pump unit
(31).
10. Install the fuel pump unit (31) into the fuel tank
(32) with its hose joint facing forward.
Be careful not to damage the fuel pump unit and
reserve sensor.
(12) O-ring (new)
(13) fuel pump base
(14) fuel pump unit holder assembly
(15) hooks
(16) grooves
(17) tabs
(13)
(16) (17)
(12)
(17)(16)
(14)
(15)
(18) yellow wire terminal
(19) green wire terminal
(20) fuel pump base terminals
(21) white wire terminal
(22) black wire terminal
(13) fuel pump base (25) grooves
(23) dust seal (new) (26) dust seal lug
(24) tabs (27) index mark
(18)
(22)
(20)
(21)
(20)
(19)
(19)
(21)
(18)
(22)
(13)
(23)
(26)
(27)
(26)
(24) (25)
(28) O-ring (new) (30) collar
(29) dust seal (31) fuel pump unit
(31) fuel pump unit
(32) fuel tank
(30)
(31)
(28)
(29)
(31)
(32)
Loading ...
Loading ...
Loading ...