Loading ...
Loading ...
Loading ...
Subframe
(cont’d)
Servicing Your Honda 49
Refer to Important Safety Precautions on page 31.
Remo
val
1. Remove the battery (page 133).
2. Remove the fuel tank (page 45).
3. Remove the muffler (page 127).
4. Remove the left side cover (page 44).
5. Remove the ECM (1) from the ECM stay (2).
6. Remove the starter relay (3) from the seat
support base (4).
7. Remove the stay mounting bolts (5), ECM stay
(2), collars A (6), collars B (7), bank angle
sensor assembly (8) and washers (9).
8. Remove the seat support base mounting bolts
(10) and collars (11). Release the hooks (12)
from the seat rail, then remove the seat support
base (4) from the subframe (13).
9. Disconnect the IAT sensor connector (14).
Disconnect the crankcase breather tube (15)
and air injection air tube (16) from the air
cleaner housing (17).
Loosen the connecting tube band screws (18).
10. Remove the negative (-) battery cable bands
(19), then remove the negative (-) battery cable
(20) from the subframe (13).
(1) ECM (3) starter relay
(2) ECM stay (4) seat support base
(1)
(2)
(4)
(3)
(2) ECM stay (7) collars B
(5) stay mounting bolts (8) bank angle sensor assembly
(6) collars A (9) washers
(4) seat support base (12) hooks
(10) bolts (13) subframe
(11) collars
(5)
(2)
(6)
(7) (8) (9)
(10)
(11)
(12)
(4) (13)
(14) IAT sensor connector
(15) crankcase breather tube
(16) air injection air tube
(17) air cleaner housing
(18) connecting tube band screw
(13) subframe
(19) cable bands
(20) negative (-) battery cable
(17)
(18)
(14)
(15)
(16)
(20)
(20)(19)
(13)
(19)
Loading ...
Loading ...
Loading ...