Loading ...
Loading ...
Loading ...
Suspension
(cont’d)
Servicing Your Honda 101
5. Loosen the fork damper assembly (7) using the
lock nut wrench (8), but do not remove them.
• Lock nut wrench 07WMA-KZ30100
NOTICE
Do not use an adjustable wrench to loosen the fork
damper: it may damage them.
6. Remove the disc cover (9) by removing disc
cover socket bolts (10).
7. Remove the speed sensor wire guide plate
screw (11) and guide plate (12).
Remove the speed sensor mounting bolt (13)
and speed sensor (14).
8. Remove the front axle nut (15) and loosen the
axle pinch bolts (16) on both forks.
Pull the front axle shaft (17) out of the wheel
hub and remove the front wheel with collars
(18).
9. Remove the brake hose/speed sensor wire
clamp bolts (19), stay A (20) and stay B (21).
10. Remove the speed sensor wire clip (22) from
the caliper bracket. Remove the front brake
caliper mounting bolts (23) and brake caliper
(24).
• Do not support the brake caliper by the brake
hose.
• Do not operate the brake lever after the front
wheel is removed. To do so will cause
difficulty in fitting the brake disc between
the brake pads.
11. Remove the fork protector socket bolts (25)
and fork protectors (26).
(5) fork bridge upper pinch bolts
(6) fork bolt assembly
(7) fork damper assembly
(8) lock nut wrench
(9) disc cover (10) disc cover socket bolts
(8)
(7)(6)
(5)
(10)
(9)
(11) screw (15) front axle nut
(12) guide plate (16) axle pinch bolts
(13) bolt (17) front axle shaft
(14) speed sensor (18) collars
(17) (18)
(18)
(11)
(16)
(15)
(12)
(13)
(14)
(16)
(19) brake hose/speed sensor wire clamp bolts
(20) stay A
(21) stay B
(22) wire clip
(23) front brake caliper mounting bolts
(24) brake caliper
(25) fork protector socket bolts
(26) fork protectors
(23)
(24)
(19)
(21) (20)
(22)
(25)
(26)
(25)
(26)
Loading ...
Loading ...
Loading ...