Loading ...
Loading ...
Loading ...
28
TROUBLESHOOTING
PROBLEM POSSIBLE CAUSES WHAT TO DO
Dryer is taking
toolong
/results were
notsatisfactory
Drying cycle selected not
appropriate for the load.
Select an appropriate cycle for the
load. Refer to ‘Drying cycles’.
Dryness level selected not
appropriate for the load.
Select a higher dryness level.
Refer to ‘Dryness Level’.
Dryer overloaded for
thecycle.
Some cycles have a lower max load
size. Refer to ‘Drying cycles’.
Try dividing the load in half and
dryhalf at a time.
Lint and/or condenser filter
isblocked.
Clean the lint/condenser filter.
Water tank is full. Refer to ‘Emptying the water
collection tank’.
Environmental conditions
maybe affecting dryer
operation.
In particularly hot or cold conditions
the dryer will take longer to dry a load
and beless efficient.
Ensure the dryer is installed in a
well-ventilated, dust-free environment.
Donot operate this dryer behind
closeddoors (ie inside a cupboard).
Load overly wet at the
start of cycle.
Remove more water from the
load before placing it in the dryer,
egselecta faster spin speed on your
washer, if appropriate for your load.
Load was damp dry at
thestart of cycle.
If the load had been partially air dried,
eg has been washed and placed on
the line, use a ‘Time Dry’ cycle and
monitor the dryness of your clothes.
Dryer not draining water
out properly.
Check the drain hose (if connected)
forblockages or damage.
Youmayneed to call for service
referto ‘Customer care’ section.
Items got tangled. Try separating items and
dryingsimilaritems together.
Referto‘Loading’ forfurther tips.
Dryer is not
draining
Drain hose not connected
tothe water tank.
Ensure the drain hose is connected
correctly. Refer to ‘Draining’ in the
installation section of this guide.
Water tank not in place
correctly.
Ensure water tank is properly inplace.
Drain hose or drain blocked
ordamaged.
Check drain hose (if connected)
anddrain for blockages or damage.
Loading ...
Loading ...
Loading ...