Loading ...
Loading ...
Loading ...
INSTALLATION INSTRUCTIONS
10
Draining
The dryer is equipped with a condenser unit which accumulates water during the
dryingcycle. This water is collected in the removable water tank located at the top
leftof the dryer. The accumulated water must be emptied after each drying cycle.
However you can also set up your dryer to drain automatically using the drain
hoseprovided.
Connecting the drain hose:
1 Remove the black hose from the connection at the back of the dryer (A).
2 Uncoil the drain hose (included with your dryer) and connect it to the black hose(B).
3 Place the other end of the drain hose into a tub or standpipe.
If you connect the drain hose onto your dryer, the other end must be secured in a
drain to prevent water draining onto the floor. Ensure the drain hose is securely fixed
in place to an appropriate drain and is leak-free at the connection to the machine.
Check the connection and drain hose regularly.
z
Maximum standpipe height is 1.0m from ground level.
z
Regularly check that your standpipe or tub is free from lint and other obstructions,
which may affect drainage and cause flooding.
z
The drain hose should be checked from time to time and replaced if any damage,
egwear, cuts, bulges, kinks, leaks, etc are found. Do not bend the drain hose sharply,
asthismay cause it to split.
z
The extended length of the provided drain hose is 1.3m.
z
In multi-storey apartments or any upper floor, the machine should be installed on
afloorequipped with a drain.
z
Draining must comply with local by-laws.
A
B
Loading ...
Loading ...
Loading ...