Kobalt KMS 0724B-03 7-1/4-in 24-volt Dual Bevel Sliding Compound Cordless Miter Saw

User Manual - Page 5

For KMS 0724B-03.

PDF File Manual, 71 pages, Read Online | Download pdf file

KMS 0724B-03 photo
Loading ...
Loading ...
Loading ...
5
SAFETY INFORMATION
Some of the following symbols may be used on this tool. Please study them and their meaning.
Proper interpretation of these symbols will allow you to operate the tool better and more safely.
SYMBOL DEFINITION SYMBOL DEFINITION
V Volts n
0
No-load Speed
or d.c.
Direct Current RPM Revolutions per Minute
°F Degrees Fahrenheit °C Degrees Celsius
No-Hands Zone. Failure
to keep your hands away
from the blade will result
in serious personal injury.
WARNING- Always wear
eye protection
WARNING- To reduce the
risk of injury, user must
read instruction manual
A danger, warning, or
caution. It means ‘Attention!
Your safety is involved.’
General Power Tool Safety Warnings
WARNING
Read all safety warnings, instructions, illustrations and specications provided with this
power tool. Failure to follow all instructions listed below may result in electric shock, re and/
or serious injury.
Save all warnings and instructions for future reference
The term “power tool” in the warnings refers to your mains-operated (corded) power tool or
battery-operated (cordless) power tool.
Work Area Safety
Keep work area clean and well lit. Cluttered or dark areas invite accidents.
Do not operate power tools in explosive atmospheres, such as in the presence of
ammable liquids, gases or dust. Power tools create sparks which may ignite the dust or
fumes.
Keep children and bystanders away while operating a power tool. Distractions can
cause you to lose control.
Electrical Safety
Power tool plugs must match the outlet. Never modify the plug in any way. Do not use
any adaptor plugs with earthed (grounded) power tools. Unmodied plugs and matching
outlets will reduce the risk of electric shock.
Avoid body contact with earthed or grounded surfaces such as pipes, radiators,
ranges and refrigerators. There is an increased risk of electric shock if your body is
earthed or grounded.
Do not expose power tools to rain or wet conditions. Water entering a power tool will
increase the risk of electric shock.
Loading ...
Loading ...
Loading ...