Loading ...
Loading ...
Loading ...
18
ADJUSTMENT INSTRUCTIONS
11. Miter-control Lever Adjustment
NOTE: This adjustment was made at the factory
and, under normal circumstances, it does not require
re-adjustment.
In the lock position, the miter-control lever (P) should
feel tight and secure and considerable effort should
be required to move the miter table. If the miter-
control lever feels loose or the table moves easily
when in the locked position, and adjustment to the
miter-control lever is required.
To adjust
a. Remove the battery pack from the saw.
b. Lift the miter-control lever (P).
c. Remove the screws securing the throat plates,
and remove both throat plates and set aside.
d. Locate the lock nut.
e. Using a 2.5mm wrench (not included), insert into the hole in the lock nut, adjust the lock
nut by turning it counterclockwise to tighten the miter-control lever or turning it clockwise to
loosen the miter-control lever until the proper amount of tension in the miter-control lever is
attained.
NOTE: it may be necessary to lock and unlock the miter-control lever to determine the proper tension.
f. Once the adjustment is complete, reinstall both throat plates. Be careful not to over
tighten,which can cause the throat plate to bow or bend.
g. Press the miter-control lever down to lock the miter table in place.
WARNING
• Never operate the saw without the throat plate installed.
12. Pivot Adjustments
NOTE: These adjustments were made at the factory and, under normal circumstances, they do
not require re-adjustment.
Saw-arm Travel Pivot Adjustment:
The saw arm should automatically rise (travel) completely to the full “UP” position by itself after
the arm-lock pin (AC) is released.
WARNING
• To avoid risk of personal injury, if your saw arm does not rise by itself, or if there is play in
the pivot joints, have your saw serviced by a qualied service technician before using.
Bevel-Pivot Adjustment:
Your miter saw arm should bevel smoothly by lifting the bevel-lock lever up to unlock the bevel
and tilting the saw arm to the left or right.
WARNING
• To avoid risk of personal injury, have your saw serviced by a qualied service person before
using if movement is tight or if there is play in the bevel pivot.
11
Lock nut
Throat plates
P
Loading ...
Loading ...
Loading ...