Loading ...
Loading ...
Loading ...
11
PREPARATION
PART DESCRIPTION PART DESCRIPTION
A Lock-off buttons
P Miter-control lever
B On/Off switch
Q Lower blade guard
C LED switch
R Main handle
D Upper blade guard
S Spindle-lock button
E Dust-extraction port
T Fixed fence
F Depth-control knob
U Sliding fence (left and right)
G Bevel-angle indicator
V Fence-lock knob (left and right)
H Bevel scale
W Clamp receptacle (left and right)
I Bevel-change lever
X 45° bevel stop
J Mounting holes (8)
Y 33.9° bevel stop
K Saw base
Z Bevel-stop bolt
L Miter table
AA Bevel-lock knob
M Miter scale
AB Sliding-lock knob
N Miter-angle indicator
AC Arm-lock pin
O Saw blade
AD Carrying handle
WARNING
• Do not allow familiarity with the miter saw to cause carelessness. Remember that one
careless moment is enough to cause severe injury. Before attempting to use any tool, be
sure to become familiar with all of the operating features and safety instructions.
• Do not attempt to modify this tool or create accessories not recommended for use with this
tool. Any such alteration or modication is misuse and could result in a hazardous condition
leading to possible serious personal injury.
• Use only a saw blade diameter in accordance with the markings on the saw and information
about the bore diameter and the maximum kerf of the saw blade. Use only saw blades that
are marked with a speed equal or higher than the speed marked on the tool.
TOOLS NEEDED
The following tools (not included) are needed for making adjustments or installation.
2.5mm wrench 3mm wrench
Phillips Screwdriver
Adjustable Wrench
Combination square
Loading ...
Loading ...
Loading ...