Loading ...
Loading ...
Loading ...
©
2015 DJI. All Rights Reserved.
51
Flight
INSPIRE 1
User Manual
3. Hold the aircraft vertically with nose pointing downward, and rotate it 360 degrees around the center
axis. Recalibrate the compass if the Aircraft Status Indicator show solid red.
If the Aircraft Status Indicator blinks red and yellow after the calibration, move your aircraft to a
different location to carry out compass calibration.
Calibrate the compass before each ight. Launch DJI GO App, follow the on-screen instruction
to calibrate the compass.
When to Recalibrate
1. When compass data is abnormal, and the Aircraft Status Indicator is blinking red and yellow.
2. When ying in a new location, or a location that is different from your last ight.
3. When the mechanical structure of the Inspire 1 has changed, i.e. changed mounting position of the
compass.
4. When severe drifting occurs in ight, i.e. the Inspire 1 does not y in straight lines.
Auto Take-off and Auto Landing
Auto Take-off
Use auto take-off to take off your aircraft automatically if the Aircraft Status Indicator displays blinking
green. Follow the steps below to use auto take-off:
1. Launch DJI GO app, enter “Camera” page.
2. Ensure the aircraft is in “P” mode.
3. Go through the pre-ight checklist.
4. Tap“ ”, and conrm ight condition. Slide to conrm and take-off.
5. Aircraft takes off and hovers at 1.2 meters above ground.
Loading ...
Loading ...
Loading ...