Loading ...
Loading ...
Loading ...
©
2015 DJI. All Rights Reserved.
37
Gimbal and Camera
INSPIRE 1
User Manual
Camera Operation
Use the Shutter and Record button on the remote controller to shoot the images or the videos through the
DJI GO app. For more information about how to use these buttons, refer to “Controlling Camera” P25.
ND Filter
Attach an ND lter to the front of the camera to reduce over-exposure and “jello” effect.
Gimbal
GimbalProle
The 3-axis Gimbal provides a steady platform for the attached camera, allowing you to capture stabilized
images and video. The Gimbal can tilt the camera up to 120 degrees and rotate 360 degrees.
-330°
+
330°
+
30°
-90°
0°
Use the gimbal dial on the remote controller to control pitch movement of the camera by default. Note that
you cannot control the pan motion of the camera by default. Enable the “Master-and-Slave” mode and
set the remote controller to “Slave” state if you wish to control both the pan and pitch movement of the
camera.
Use the gimbal dial on the remote controller to control the pitch movement of the camera in the
single remote controller mode, however, you cannot control the pan movement of the camera.
Pan Control
Follow the instructions below to use the gimbal dial to control the pan movement of the gimbal:
1. Power on the aircraft and remote control, launch DJI GO app and enter “Camera” page.
2. Tap “RC Control Settings” icon and select either C1 or C2 customizable button as the gimbal pitch/
yaw switching button.
3. Select “Gimbal Pitch/Yaw” from the dropdown list.
Loading ...
Loading ...
Loading ...