Loading ...
Loading ...
Loading ...
©
2018 DJI All Rights Reserved.
49
Mavic Air
User Manual
Auto Takeoff and Auto Landing
Auto Takeo
Use auto takeo only if the Aircraft Status Indicator is blinking green. Follow the steps below to use the
auto takeo feature:
1. Launch the DJI GO 4 app, and tap “GO FLY” to enter Camera View.
2. Complete all steps in the pre-ight checklist.
3. Tap .
4. If conditions are safe for takeo slide the slider to conrm and the aircraft will take o and hover 3.9 ft (1.2 m)
above the ground.
Auto Landing
Use auto landing only if the Aircraft Status Indicator is blinking green. Follow the steps below to use the
auto landing feature:
1. Tap .
2. If conditions are safe for landing condition slide the slider to conrm and the aircraft will commence
the auto landing procedure. Warnings will appear in the DJI GO 4 app if the aircraft detects that
conditions are not suitable for landing. Be sure to respond promptly.
During the auto landing procedure, auto landing can be aborted immediately by tapping in
the DJI GO 4 app.
The Aircraft Status Indicator indicates whether the aircraft is using GPS and/or the Downward
Vision System for ight control. Refer to the Aircraft LEDs and Status Indicator section for
more information.
It is recommended to wait until the GPS signal is strong before using the auto takeo.
Starting/Stopping the Motors
Starting the Motors
A Combination Stick Command (CSC) is used to start the motors. Push both sticks to the bottom
inner or outer corners to start the motors. Once the motors have started spinning, release both sticks
simultaneously.
OR
Loading ...
Loading ...
Loading ...