Loading ...
Loading ...
Loading ...
22
©
2018 DJI All Rights Reserved.
Mavic Air
User Manual
Exiting ActiveTrack
Tap on the screen or toggle the Flight Mode switch to S-mode on the remote controller to exit
ActiveTrack. After exiting ActiveTrack, the aircraft will hover in place, at which point you may choose to
y manually, track another subject, or return to home.
SmartCapture
Deep learning gesture recognition allows you to take selfies, record videos, and control the aircraft
using simple hand gestures. The Mavic Air features brand new modes like GestureLaunch, Follow, and
GestureLand. (Note: Aircraft rmware v1.0.1.0 or higher is required to use SmartCapture; Aircraft rmware
v1.0.2.0 or higher is required to y the aircraft without using the remote controller or DJI GO 4. )
DO NOT use ActiveTrack in areas with people, animals, small or fine objects (e.g. tree
branches or power lines), or transparent objects (e.g. glass or water).
Stay clear of obstacles near the ight path, especially obstacles to the left and right of the
aircraft.
Operate the aircraft manually (press the Flight Pause button or toggle the Flight Mode switch
to S-mode on the remote controller) or tap in DJI GO 4 in an emergency.
Be extra vigilant when using ActiveTrack in any of the following situations:
a. The tracked subject is not moving on a level plane.
b. The tracked subject changes shape drastically while moving.
c. The tracked subject could be out of sight for a long time.
d. The tracked subject is moving on a snowy surface.
e. The tracked subject has a similar color or pattern to its surrounding environment.
f. Available light is too low (< 300 lux) or too high (> 10,000 lux).
You must follow local privacy laws and regulations when using ActiveTrack.
1.2m
SmartCapture can be selected either by tapping in the DJI GO 4 app and selecting
SmartCapture or by pressing the Function button twice. The rst time you use SmartCapture
select it in the DJI GO 4 app and read the warning prompt carefully. Only use SmartCapture if
you understand the warning.
Only use SmartCapture in open areas with no obstacles, with sucient light, and away from
crowds.
Only use SmartCapture with the propeller guards mounted.
Activating FaceAware and PalmControl
To use SmartCapture rst activate FaceAware and PalmControl:
1. Tap in the DJI GO 4 app and select SmartCapture or press twice on the Function button. When
FaceAware has activated the aircraft will beep twice and the Front LEDs will become solid yellow.
2. Next, use one of the following two methods to activate PalmControl:
a. GestureLaunch: If the aircraft is on the ground you can use
GestureLaunch to command the aircraft to take off and activate
PalmControl. Stand at a distance of 6.6 to 9.8 ft (2 to 3 m) in front
of the aircraft with your palm in front of the aircraft’s nose. Keep
your palm open and your ngers close together. After about two
seconds the aircraft will take o automatically and hover at a height
of 3.9 ft (1.2 m). The Front LEDs will blink green slowly to indicate
that PalmControl has been activated.
Loading ...
Loading ...
Loading ...