Loading ...
Loading ...
Loading ...
14
©
2018 DJI All Rights Reserved.
Mavic Air
User Manual
Warning
Aircraft Status
Indicator
DJI GO 4 App
Remote
Controller
Remarks/Instructions
Low Battery
Level
Blinks red slowly
Tap “Go-home” to have
the aircraft return to the
Home Point automatically
or “Cancel” to resume
normal ight. If no action
is taken, the aircraft will
automatically y home after
10 seconds.
Alarm sounds
continuously
Battery level is low. Fly
the aircraft back and land
promptly, then stop the
motors and replace the
battery.
Critically Low
Battery Level
Blinks red quickly Display ashes red Alarm sounds
continuously
The aircraft will descend
and land automatically.
This procedure cannot be
cancelled. If there is danger
of collision occurring, push
the throttle up and try to
navigate away.
Failsafe RTH
The Forward Vision System allows the aircraft to create a real-time map of its ight route as it ies. If the
Home Point was successfully recorded and the compass is functioning normally, Failsafe RTH will be
automatically activated if the remote control signal is lost for a specied amount of time (three seconds
when using the remote controller and 20 seconds when ying with a mobile device).
When Failsafe RTH is activated the aircraft starts to retrace its original ight route home. If the wireless
control signal is re-established within 60 seconds of Failsafe RTH being activated, the aircraft hovers at
its present location for 10 seconds and waits for pilot commands. The user may tap in the DJI GO 4
app or press the RTH button on the remote controller to cancel Failsafe RTH and retake control. If no pilot
command is given the aircraft ies to the Home Point in a straight line. If the wireless control signal is still
lost 60 seconds after Failsafe RTH was activated the aircraft stops retracing its original ight route and ies
to Home Point in a straight line.
RTH Procedure
Smart RTH, Low Battery RTH, and Failsafe RTH follow this procedure:
1. The aircraft adjusts its orientation.
2. a. If the aircraft is further than 20 m from the Home Point it ascends to the pre-set RTH attitude and
then ies to the Home Point.
b. If the aircraft is between 5 m and 20 m from the Home Point it ies ies to the Home Point at the
current altitude, unless the current altitude is less than 2.5 m, in which case the aircraft ascends
to 2.5 m and then ies to the Home Point.
c. If the aircraft is less than 5 m from the Home Point it lands immediately.
3. The aircraft lands and stops its motors once it reaches the Home Point.
RTH and Battery Level Warnings
If a battery level warning appears, take action as described in the table below.
Loading ...
Loading ...
Loading ...