Loading ...
Loading ...
Loading ...
©
2018 DJI All Rights Reserved.
25
Mavic Air
User Manual
Tripod Mode
Tap in the DJI GO 4 app to select Tripod mode. In Tripod mode, the maximum flight speed is limited
to 2.2 mph (3.6 kph). Responsiveness to stick movements is also reduced for smoother, more controlled
movements.
Only use Tripod mode where the GPS signal is strong or light conditions are ideal for the
Vision Systems. If the GPS signal is lost and if the Vision Systems are disabled or unavailable,
the aircraft will automatically switch to ATTI mode. In this case, ight speed will increase and
the aircraft will not hover in place. Use Tripod mode carefully.
The aircraft does not exit SmartCapture automatically. While the aircraft is airborne and after
it has been landed using GestureLand the aircraft will continue to respond to hand gestures
until you manually exit SmartCapture, so caution is required.
When using SmartCapture without the remote controller or the DJI GO 4 app:
a. If no face or palm is detected in the first 60 seconds after takeoff, the aircraft lands
automatically;
b. If the subject is lost during Follow the aircraft ies back to the position the subject was
most recently detected at and waits. If the aircraft detects the subject within 30 seconds
it continues following it. If the subject is not detected within 30 seconds the aircraft lands
automatically.
Cinematic Mode
Tap
in the DJI GO 4 app to select Cinematic mode. In Cinematic mode, the aircraft’s braking distance
is extended and its rotation speed is reduced. The aircraft will slow down gently until it stops, keeping
footage smooth and stable even if control inputs are choppy.
GestureLand
Move your palm down slowly to make the aircraft descend. Continue until
it has descended to its minimum altitude, then continue commanding it to
descend for a further three seconds and it will land automatically and its
motors will stop.
Front LEDs blink green slowly
Exercise caution once you have landed the aircraft using GestureLand, as the aircraft will
continue to respond to hand gestures until you exit SmartCapture. If the aircraft detects
the GestureLaunch gesture before you have exited SmartCapture, the aircraft will take off.
Exercise caution when approaching the aircraft and ensure you do not accidently make the
GestureLaunch gesture.
Exiting SmartCapture
Tap in DJI GO 4 or toggle the Flight Mode switch to S-mode on the remote controller to exit
SmartCapture. If you are using SmartCapture without the DJI GO 4 app, to exit SmartCapture rst land
the aircraft using GestureLand then either power the aircraft o, connect the aircraft to DJI GO 4 and
tap , or connect the aircraft to the remote controller and toggle the Flight Mode switch to S-mode.
Loading ...
Loading ...
Loading ...