Loading ...
Loading ...
Loading ...
EN 43
10. SETUPS
10.1. Network connection
[HOME] A “Setup” A “Network” A “Network installation”
Perform the network connection setup in order to use network features, such as BD-Live™ and the network update
function.
C Connection test
After you enable a network connection or change network settings, always perform the connection test to check to see if
the connection is correctly made.
1. Press [HOME] and use [ ] to select “Setup” in the home menu, then press [OK].
2. Use [
] to select “Network”, then press [OK].
3. Use [
] to select “Network installation”, then press [OK].
4. Use [
] to select “Connection Test”, then press [OK].
• Connection test will automatically start. The test result will appear right after the test finishes.
5. After the test results display, press [OK].
NoteD
• If the connection test passes, you are ready to use BD-Live™ and the network update function, using the Internet
without making any additional settings.
• If the connection test fails, you may need to check your router settings and make sure the physical connection is
secure. If you need the MAC address of this unit to complete your Router settings, you can view it in “View network
settings”.
• When connecting this unit directly to a modem for the first time or connecting it to a modem which was previously
connected to any other network device (e.g. a Router, PC, etc.), you may have to power cycle the modem (unplug the
modem’s and/or router’s AC power cord from its AC outlet for 30 seconds and then plug it back in), this may reset the
settings in the modem. If you have a telephone/internet modem with your cable service then you may have to use its
reset button or remove the backup battery to reset this type of modem.
• If the connection test fails, this unit is not connected to the Internet. In this case, you cannot use the BD-Live™
and network update function. Please confirm router settings or contact your ISP (Internet Service Provider) for
troubleshooting assistance.
C Network configuration
Auto setup
In order to make a wired connection, connect an ethernet cable from a router with internet access. A network will automatically
be established.
• In order to confirm that this unit is connected to the Internet, perform “Connection test” (refer to page 43).
1. Connect an ethernet cable from a router with internet access.
2. Press [HOME] and use [
] to select “Setup” in the home menu, then press [OK].
3. Use [
] to select “Network”, then press [OK].
4. Use [
] to select “Network installation”, then press [OK].
5. Use [
] to select “Start”, then press [OK].
6. Use [
] to select “Auto setup”, then press [OK].
• Network setting will automatically be performed.
7. “Network connection succeeds.” will be displayed. Select “Finish”, then press [OK] to complete the settings.
continued on next page
Loading ...
Loading ...
Loading ...