Loading ...
Loading ...
Loading ...
Rear Hard Top Installation
NOTE: If the door frames are installed from soft top usage,
they must be removed prior to installation of the hard top.
1. Inspect the hard top seals for damage and replace if
necessary.
2. Install the hard top using the same steps for removal in
reverse order.
Make sure that the hard top is sitting flush with the body
at the sides and check to ensure that there is a uniform gap
between the lift glass and hard top.
NOTE:
• The Torx fasteners that attach the hard top to the body
should be torqued to 88 in lb +/- 22 in lb (10 N·m +/-
2.5 N·m).
• It is not necessary to pinch connection when reinstall-
ing washer hose. Push on until click is heard.
DOOR FRAME
WARNING!
• Do not drive your vehicle on public roads with the
door frame(s) removed as you will lose the protection
that they can provide. This procedure is furnished
for use during off-road operation only.
• Do not drive your vehicle on public roads with the
doors removed as you will lose the protection that
they can provide. This procedure is furnished for use
during off-road operation only.
CAUTION!
Failure to follow these cautions may cause interior
water damage, stains or mildew:
•
Opening a door or lowering a window while the top is
wet may allow water to drip into the vehicle’s interior.
• Careless handling and storage of the removable door
frame(s) may damage the seals, causing water to leak
into the vehicle’s interior.
• The door frame(s) must be positioned properly to
ensure sealing. Improper installation can cause water
to leak into the vehicle’s interior.
92 GETTING TO KNOW YOUR VEHICLE
Loading ...
Loading ...
Loading ...