Loading ...
Loading ...
Loading ...
NOTE: It may be necessary to use a battery terminal puller
tool in order to separate the wiper arms from the shaft after
the nuts have been removed.
11. Remove the lower windshield plates by removing the
six black round-headed Torx head screws (using a #40
Torx head driver) on each side of the base of the
windshield.
12. Lower the windshield gently until it contacts the
rubber hood bumpers.
13. Secure the windshield by passing a cinch strap through
the footman hoop on the center of the hood and on the
center of the windshield frame. Tighten the strap to
secure the windshield in place.
Raising The Windshield And Replacing Side Bars
1. Raise the windshield.
2. Loosely attach the rear of the side bar to the sport bar.
Refer to Step 4 of “Lowering Windshield And Removing
Side Bars” earlier in this section.
Step Eleven
Step Two
166 GETTING TO KNOW YOUR VEHICLE
Loading ...
Loading ...
Loading ...