Loading ...
Loading ...
Loading ...
Front Door Removal
WARNING!
Do not drive your vehicle on public roads with the
doors removed as you will lose the protection they can
provide. This procedure is furnished for use during
off-road operation only.
NOTE: Hinge pin can break if overtightened during door
reinstall (Max Torque: 10 N·m / 7.5 ft· lb).
1. Roll down the glass window to prevent any damage.
2. Remove the hinge pin screws from the upper and lower
outside hinges (using a #T50 Torx head driver).
NOTE: The hinge pin screws and nuts can be stowed in
the rear cargo tray located under the rear loadfloor.
3. Unplug the wiring harness connector under the instru-
ment panel by pushing the tab at the base of the
connector and pulling down to disconnect.
Door Removal Warning Label
Hinge Pin Screw
3
GETTING TO KNOW YOUR VEHICLE 33
Loading ...
Loading ...
Loading ...