Loading ...
Loading ...
Loading ...
- 13 -
Using LED Flashlight
Press the Main Power Button to turn on the PHOENIX Elite. The LCD Screen will be lit with the [Battery Level]
icon appearing.
When not using the LED Flashlight, press the Main Power Button to turn off the PHOENIX Elite.
The LED Flashlight has three lighting modes: bright (100% brightness), dim (50% brightness), and SOS.
Press the Flashlight On/Off Button to turn on the LED Flashlight, switch lighting modes, and turn off the LED
Flashlight. Long press the Flashlight On/Off Button to turn off the LED Flashlight no matter what lighting mode
it is on.
To prolong the service life of the PHOENIX Elite, keep it away from water, dust, and dirt. DO NOT leave the
PHOENIX Elite in harsh environments.
Keep the PHOENIX Elite away from corrosives, fire, and heat sources.
Keep the PHOENIX Elite recharged when not in use and avoid connecting devices with high power ratings
when the battery level is low.
If the PHOENIX Elite does not operate normally, please refer to the following table for possible causes and
corrective steps.
If the following corrective steps do not work, please contact the Renogy technical support team for help. Refer
to the last page of the User Guide for contact information.
If the PHOENIX Elite is not used frequently, keep its battery level at around 50%. Store the PHOENIX Elite in
a clean, dry, and well-ventilated environment with a temperature around 77℉ (25℃) and a humidity no higher
than 75%. Recharge the PHOENIX Elite at least once every two months.
NOTE
The PHOENIX Elite may not be compatible with the devices that require high current impulses
despite their conformity with the output ports specifications.
NOTE
The PHOENIX Elite may not be able to deliver exactly 299.5Wh of energy when powering
devices with high power ratings.
Battery high temperature protection may be triggered when the PHOENIX Elite is operating at
full load. Cool down the PHOENIX Elite before resuming operation.
CAUTION
When using the AC Outlet, keep 4 inches of space on either side of the PHOENIX Elite to
guarantee efficient heat dissipation.
CAUTION
When the battery level drops to 0%, the PHOENIX Elite will turn off automatically. Please
recharge the PHOENIX Elite as soon as possible to avoid permanent damage to the battery.
CAUTION
When the battery level drops below 10%, use of the AC Outlet will be disabled. If the total output
power still exceeds 200W, use of the CIG Port and DC Output Ports will be subsequently
disabled. DO NOT connect devices with high power ratings to the PHOENIX Elite when the
battery level is low.
CAUTION
MAINTENANCE
TROUBLESHOOTING
Loading ...
Loading ...
Loading ...