Loading ...
Loading ...
Loading ...
59
Console programs do not start
• Perform Keypad test in Maintenance mode
• If you cannot access the test, and the keys seem to have no aect
when pressed, then the keypad has malfunctioned.
Program starts but no data registers when 7.5 S is pedaled
• Check that the connectors are properly seated in the back of the
consoles.
• Perform the Sensor tests in Maintenance mode. If one of the
sensors does not b.work it needs replacement. If both sensors do
not work then it could be a bad b.console or both sensors are bad.
Symmetry and/or watt measurement is incorrect
• Perform the sensor tests in Maintenance Mode
Cannot adjust seat fore/aft or back angle, or seat
adjustments will not lock in place
Adjust the thumb nuts located to the rear of the seat adjustment
levers. If the cables attached to the levers stretch it is possible the
latch for the seat will not disengage, or engage, properly. Adjusting
the thumb nut can remedy this.
Clicking noise when pedaling
• Make sure the pedal is tightened properly.
• Make sure the swing arms are securely tightened where they attach
to the 7.5 S.
• Check that the leveling feet on the bottom of the 7.5 S are adjusted
properly.
One pedal has no resistance but the other does
• The drive cable has jumped o of the pulley system.
Loading ...
Loading ...
Loading ...