Loading ...
Loading ...
Loading ...
58
Error messages
• EEPROM Error – Solution for this is to replace the console (Note:
this is the only error message)
• Motor Error – Press stop to enter idle mode – This error means the
motor that controls resistance did not respond a s expected. If the
error occurs press stop. The console will return to the idle mode. You
can then use the console but there will be no resistance changes.
You may try to disconnect the power to the 7.5 S for one minute and
re-connect. This may solve the problem, but if it does not call
service.
Troubleshooting
Below are common problems and basic checks to solve them. If these
tips do not solve your problem then call your local distributor for
service.
No power
• Make sure the A.C. outlet has power (90~240VAC) and the line cord
is plugged in securely to the AC adapter.
• Check the connection of the DC power wire from the adapter where
it enters the 7.5 S.
• Make sure all connectors in back of the console are securely seated
in place.
Loading ...
Loading ...
Loading ...