Loading ...
Loading ...
Loading ...
49
801710
Problem/error Indication on the display unit
and description of error
What to do?
E4 System overheating
Clean the filter. See chapter »CLEANING
AND MAINTENANCE/Cleaning the
net filter in the door« or call a service
technician.
E6, E7, E8 Control unit failure
Disconnect the tumble dryer from the
power supply.
Call service centre.
Warnings indicated on the display unit may include the following:
Warning Indication on the display unit
and description of warning
What to do?
Condensate tank warning Empty the condensate tank before
resuming the programme (see chapter
»CLEANING AND MAINTENANCE/
Emptying the condensate tank«).
»PF« Power supply failure warning
Drying interrupted due to power supply
failure.
Press the (3) START/PAUSE button to
restart or resume the drying programme.
Write down the error code (e.g. E0, E1), switch off the dryer, and call the nearest authorized service
(call centre).
Sounds
In the initial drying stage or during drying, the compressor and the heat pump cause noise; this,
however, does not affect the tumble dryer operation.
Humming sound: compressor noise; the noise level depends on the program and the drying stage.
Buzzing sound: the compressor is occasionally ventilated.
Pumping or liquid flowing sound: the pump is pumping the condensate into the condensate tank.
Clicking sound: start of automatic cleaning of the heat exchanger (compressor).
Rumbling or rattling noise: during drying when the laundry also includes hard parts (such as
buttons, zippers etc.)
Loading ...
Loading ...
Loading ...