Loading ...
Loading ...
Loading ...
48
801710
Problem/error Cause What to do?
Laundry not dried
or drying takes too
long.
• Filters are not clean. • Clean the filters (see chapter
»CLEANING AND MAINTENANCE«).
• Dryer is placed in a closed
room; room that is too cold;
or room that is too small and
the air overheats as a result.
• Make sure there is adequate supply of
fresh air to the dryer; for example, open
the door and/or window.
• Check if the temperature in the room
where the dryer is installed is too high
or too low.
• Laundry was not sufficiently
wrung or spun.
• If the laundry is still wet after the drying
cycle, repeat the drying and select an
appropriate drying programme (after
cleaning the filters).
• Amount of laundry dried in
the appliance is too large or
insufficient.
• Use a suitable programme or extra
functions.
• Laundry (such as bedding)
gets tangled into large balls.
• Close the buttons or zippers on
the laundry before drying. Select a
suitable programme (e.g. the Bedding
program).
• After the drying process, loosen the
laundry and select an additional drying
programme (e.g. Dry (Timed drying
program).
Drum lighting error • There is no lighting when the
dryer door is opened.
• Disconnect the dryer from the power
mains and call an authorized service
unit.
Errors indicated on the display unit may include the following:
Problem/error Indication on the display unit
and description of error
What to do?
E0 Control unit failure
Call service centre.
E1 Temperature sensor failure
Call service centre.
E2
Communication error
Call service centre.
E3 Pump error
Call service centre.
Loading ...
Loading ...
Loading ...